tefen MixRite Manual Del Usuario página 2

The MixRite is powered by water flow, with minimal loss of
pressure. The water engine powers the proportioning unit. No
external power is required.
The proportioning unit injectors liquid additives in direct relation to
the amount of water that passes through the motor and injects the
additives into the water system.
The water engine action:
The suction and proportioning unit is built from a piston connected
to the water engine, from which it derives its movement. The
piston moves within a cylinder with a non-return valve. The
movement of the piston within the cylinder causes the water to be
injectored and the required liquid additive to be drawn through a
pipe inserted into a container. It is possible to regulate the supply
ratio between the additive and the water passing through the
injector in models: 2502,2504,2510,12502,12504,12510.
In models 2500,2501,2506,12500,12501,12506 the dosing is
predetermined and can not be changed.
In models 2512,2514,12512,12514
transferred through a bypass tube directly into the main water line,
without contact with the water engine.
In models 2512IN, 2514IN, 12512IN, 12514IN The drawn additive
is transferred through a inlet bypass directly into the main water
line, without contact with the water engine.
Air release valve
Water outlet
Suction unit with adjustable
proportional dosing
User Manual
2
The drawn additive
Water engine
Water inlet
Additive suction tube
is