Items supplied
Ultra-Violet Insect Lamp
4 x 1.5 V batteries type D/Mono/LR20
Operating Instructions
Technical Data
Power supply :
or external power transformer, 6V
1000 mA
(not supplied)
High voltage mesh:
UV light tube:
Power transformer
(not supplied)
Input voltage :
Output voltage:
Output level:
Protection class:
Appliance description
1 On/Off switch
2 High voltage mesh
3 Power transformer socket
4 Connecting cable
5 Battery holder
6 Battery compartment cover
7 Locking device
4 x 1.5 V batteries type
D/Mono/LR20
/
700 V
4 W type F4T5/BL
230 - 240 V ~ 50Hz
6 V
1000 mA
6 VA
II /
Commissioning
Battery operation
The Ultra-Violet Insect Lamp requires 4 x 1.5 V batte-
ries of the type D/Mono/LR20, which are already in-
serted in the battery compartment 5 on delivery.
To protect against premature discharge, the battery
terminals are provided with insulating strips which
must be removed before use.
1. Loosen the locking device 7 on the battery
compartment 6 and slide it in the direction of
the arrow out of the retainer tracks.
2. Pull the battery holder 5 out of the battery com-
partment. Take care not not to pull on the con-
necting cable 4.
3. Remove the plastic strips from the battery compart-
ment 5.
4. Replace the battery holder 5 into the battery
compartment so that it runs into the retainer tracks.
Ensure that the connector cable 4 does not be-
come trapped.
5. Slide the battery compartment lid 6 into the
retainer tracks until the snap tab engages hearable
when the lid is closed.
Mains power operation
1. Insert the plug of the power transformer into the
power transformer socket 3.
2. Connect the power transformer with a mains
power socket.
Using the appliance
Mode of operation
Undesirable insects, such as mosquitoes and midges,
are attracted to the UV light. They fly to it and then
make contact with the high voltage mesh 2, which
kills them quickly.
1. Place the appliance as close as possible to your
seating, on a level and dry surface.
- 15 -