Sears Craftsman 247.776350 Manual Del Operador página 7

Attaching The Debris Collection Bag
To attach the bag, place the opening of the bag
completely over the discharge chute.
Position the bag so that the wing knobs which
secure the discharge chute to the housing are
completely covered.
Pull on the drawstrap until the bag is tight around
discharge chute. See Figure 4.
4ousing
Debris Collection Bag
Figure 4
Emptying the Debris Collection Bag
Squeeze the locking buckle to release the bag's
drawstrap before loosening it from the discharge
chute. See Figure 5
Empty the bag and reattach to the discharge chute
opening. Refer to Figure 4.
Locking Buckle
J
Figure 5