Assembly; Storing Accessories; Operating The Wet/Dry Vacuum - Kawasaki 692358 Manual De Instrucciones

1. Turn the tank upside down and snap the
two casters inside the 2 bottom holes
and the 2 wheels inside the 2 side holes.
Lift and put the tank on its casters and
wheels.
2. For Wet
and Dry
Vacuum
cleaning,
attach the
supplied
foam filter
(if not
factory
installed).
LATCH
5. Insert the end of the vacuum hose over
the vacuum port on the side of the tank
and turn clockwise to tighten securely
in place.
6. Choose the desired nozzle/extension
wand(s) and push it onto the hose nozzle.

ASSEMBLY

PUSH INTO
PLACE
3. For Dry
Vacuum
cleaning,
fit the
supplied
disposable
collection
filter bag.
4. Reinstall and securely latch the
powerhead onto the collection tank with
on/off switch centered over vacuum
port on the side of the tank.
VACUUM PORT
9

STORING ACCESSORIES

Slide all accessories onto the posts in
the base for storage.

OPERATING THE WET/DRY VACUUM

To reduce the risk of fire or explosion, do not operate this vac in areas with
flammable gases, vapors or explosive dust in the air. Flammable gases or
vapors include but are not limited to; lighter fluid, solvent type cleaners, oil-
base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but
are not limited to; coal, magnesium, grain or gun powder. Do not vacuum
explosive dust, flammable or combustible liquids or hot ashes. Do not use
this vac as a sprayer.To reduce the risk of health hazards from vapors or
dusts, do not vacuum toxic materials.
To reduce risk of hearing damage, wear ear protectors when using the vac
for extended hours or when using it in a noisy area. The operation of any util-
ity vac can result in foreign objects being blown into the eyes, which can result
in severe eye damage. Always wear eye protection.
Static Shock may be experienced in dry weather when vacuuming fine debris
with vacuum cleaners due to accumulation of static charge on the hose or on
the vacuum.
10