hi-Fun hi-Call Manual Del Usuario página 7

To activate the pairing mode you need to switch off hi-Call and
switch it on again holding the power button (3) until the
multifunction LED (2) will flash alternately red and blue.
Now you can select hi-Call from the list of found devices on your
multifunction LED (2)
flashes slowly in blue.
Now is possible to make calls through hi-Call.
3) Switch off hi-Call.
To switch off hi-Call hold the power button (3) until the LED (2)
flashes twice in quick succession. Immediately will hi-Call turn itself
off.
Make and receive phone calls
If hi-C
receive phone calls thanks to the microphone and the speaker
placed respectively on the little finger and on the thumb of the left
glove. The buttons which control hi-Call functions are placed on the
back side of the glove over the wrist.
1)Answer an incoming call.
To answer an incoming call press briefly the multifunction button
(1).
2) End a phone call.
To end a phone call press briefly the multifunction button (1) when
you want to end the call.
3) Reject an incoming call.
To reject an incoming call hold the multifunction button (1) for 2
4) Activate voice dialing / voiceover / Siri.
When there are no calls in progress it is possible to activate voice
dialing / voiceover / Siri from your mobile phone using hi-Call.
To activate voice dialing / voiceover / Siri hold the multifunction
button (1) until you hear a tone from the speaker on the thumb of
1);
when you hear the second tone you can pronounce the command.
5) Call the last selected number.Press twice (double click) the
multifunction button (1).