MIRKA MIRO 955 Instrucciones De Manejo página 13

the speed. Generally, you should use the higher speed for fast stock removal and the lower speed
for more precise control.
HOW TO USE THE TOOL
Effective control of this powerful saw requires two-handed operation for maximum safety and
control.
The proper hold is to keep one hand on the main handle and the other hand on the sponge grip
on the column. It is vitally important to keep stable footing at all times, especially when standing
on scaffolding or stilts.
SANDING OPERATIONS
Once the machine and vacuum cleaner are set up and all safety measures and equipment are in
place, begin by turning on the vacuum cleaner and then the machine. (If you are using a vacuum
cleaner with integrated switching, then simply turn the machine on.) Begin sanding and carefully
contact the work surface as lightly as possible-just enough to keep the sanding head flat against
the surface. The joints in the sanding head allow the sanding disc to follow the contours of the work
surface. The best technique is to use overlapping sweeps and keep the head in constant
motion. Never stop too long in any one place or there will be swirl marks. With experience it will
be very easy to create excellent results.
NOTE: Ensure that the sandpaper you are using is suited to the task. Overly coarse grit paper
may remove material too quickly to control. While overly fine grit paper may clog too often
and not shape down the surface.
CAUTION: Take care to avoid pointed projections and nails, etc. This will wipe out the
sandpaper and probably damage the sponge pad as well.
MAINTENANCE
KEEP TOOL CLEAN
Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned
with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or
otherwise damage the material.
Wear safety glasses while using compressed air. Clean the vacuum swivel connector
as too much dust will keep it from turning freely.
9
13