Asus PL-N12 Serie Guia De Inicio Rapido página 4

LEDs and buttons
LED
Power
Powerline On
Ethernet
Wi-Fi
BUTTON
Clone
Pair
Reset
4
U10923_PL-N12_QSG.indb 4
STATUS
On/Off
Blinking
Off
Blinking
On/Off
Blinking
Blinking rapidly
Blinking every five
seconds
Press and hold the button for about one second to start clon-
ing the parent AP's SSID and password.
Press and hold the button for about one second to start the
pairing process.
Press and hold the button for about five seconds to restore
the PL-N12 to the factory default settings.
DESCRIPTION
Your PL-N12 is on/off.
When switched on, the power LED
turns from red to green in about
one minute, indicating that it is
ready to use.
Blinking every second: Pairing is in
progress.
The device is connected to one or
more powerline devices.
The device is not connected to any
powerline devices.
In Power-Saving mode, the power-
line LED blinks every 15 seconds.
A device is connected or not con-
nected to the Ethernet port.
The powerline adapter is transfer-
ring data via the Ethernet port.
Your PL-N12 is cloning the parent
AP's SSID and password.
Your PL-N12 is resetting to the
factory default settings.
DESCRIPTION
2015-10-20 18:00:53