1. Before mounting the zoom lens
1-1 Safety precautions
Be sure to screw the zoom lens and adapter ring down
completely. Unless they are securely screwed on, they
could fall off and cause damage or injury (especially
when the projector is ceiling-mounted).
1-2 Check product contents
• Make sure that you have all the parts, as shown below, before starting.
Rear lens cap
User's manual (this document)
• In addition to the included screwdriver, you will also need a Phillips
screwdriver, and various other common tools.
Memo
12
02_SZL_DTP_E.p65
Warning
Zoom lens
Front lens cap
Be sure to use a Phillips screwdriver that fits
the screws properly.
Page 12
Screwdriver
Used to tighter/remove
mounting screws
03.2.19, 5:39 PM
Adobe PageMaker 6.5J/PPC