Technical Specifications; Declaration Of Conformity (Ce) - Steinbach Poolrunner Battery Basic Manual De Instrucciones

Ocultar thumbs Ver también para Poolrunner Battery Basic:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
Troubleshooting
Malfunction
Cause
The cleaner
Battery protection
cannot be
feature
switched on
The indicator
light on the
The adapter is
adapter is not
damaged.
working.
The robot
continues to
beep or the
wheel does
not turn after
Cleaner malfunction
the cleaner
has been fully
immersed in the
water
Unsuitable wheel
setting
The cleaner
Special pool shape
cannot clean all
areas.
Your pool's water
circulation system
is on.
The cleaner
Seal or water outlet
cannot rotate at
is stuck
the pool wall
Important information
Technical specifi cations
■ Output voltage: 12.6 V
■ Rated capacity: 30 W
■ Rated input voltage of the charger: 100 V - 240 V
■ Input frequency of the charger: 47 Hz - 63 Hz
■ Rated output current of the charger: 1.8 A
■ Rated output voltage of the charger: 12.6 V
■ Battery life up to 60 min
■ Charging time: 3-4 hours
■ Battery capacity: 2600 mAh
■ Battery: Lithium ions
■ Max. cleaning surface: 25 m
2
■ Speed of movement: approx. 16 m/min
■ Filter performance: approx. 2,5 m³/h
■ Filter grade: 180 μm
■ Max. water depth: 2.0 m
■ IP class: IPX8 (main housing of the cleaner), IP20 (charger)
■ Pool water temperature: 18 ºC - 35 ºC
Service
Please do not send the device to us without authorisation! You should fi rst
get in touch with our service centre.
If your claim is not covered by the warranty/guarantee, any costs incurred
will be charged.
Guarantee processing / guarantees are handled by the company Steinbach
VertriebsgmbH.
The company Steinbach VertriebsgmbH handles all services (repairs,
dispatch of spare parts) for your product. A return is not possible. Please
contact your retailer where you bought the product.
10
Cleaning
Use conventional cleaning products for cleaning and not solvent-con-
Solution
taining and abrasive detergents or hard sponges, brushes etc. The
Charge the robot
cleaning robot is, in principle, also suitable for pools with salt electrol-
Please contact our
ysis, provided the salt content does NOT exceed 0.5%. It is important
customer service
to note that the robot must be rinsed with fresh water on the inside and
department
outside after every cleaning operation in order to avoid damage to the
device!
Please contact our
customer service
Storage
department
The product must be thoroughly dried after cleaning.
is not being used, store it in a well ventilated place out of direct sunlight. Avoid
direct sunlight. Make sure the room temperature is above 5°C in winter.
Please contact our
At the end of the season
customer service
department
The battery should be fully charged before storage. When storing for longer
periods of time, charge the battery again in a three-month cycle. Only use the
authorised original charger.
Set the wheels in line with
your pool.
Disposal
Adjust the wheels to
Disposing of packaging: The packaging material has been selected
increase the cleaning
in view of environmental concerns and disposability and is therefore
angle
recyclable. The paper and cardboard can be recycled, as can the plastic
Please switch off
coverings.
the fi lter system.
Disposing of the product: Applicable in the European Union and other
European states with systems in place for collecting and sorting recycla-
Remove the cleaner
ble materials. Dispose of the product in accordance with any laws and
from the water and try to
regulations applicable at your place of residence.
release the seal and/or
outlet. You can contact
our Customer Service
Department.
Guarantee
The respective country's legal provisions for warranty conditions shall apply
accordingly.

Declaration of conformity (CE)

The EU declaration of conformity can be requested via the address shown
at the end of this manual.
Old devices must not be placed in the household
waste! Should the robot become unusable, each customer
is legally obligated to separate old devices from the
household waste, e.g. take the device to your commu-
nity/area collection point. It is therefore ensured that old
devices are professionally recycled and negative effects on
the environments are mitigated. For this reason, electrical
devices are marked with the symbol depicted here.
061205_v1911
EN
When the pool cleaner

Publicidad

Tabla de contenido
loading

Tabla de contenido