Cleaning And Maintenance - Reer BABYPHON AURIGA Manual Del Usuario

K ART NO. INT063 SIZE:148 * 210 mm 13/12/2010
Calibrating the units (in case of malfunction):
01. Calibrating parents' unit and baby's unit
- Turn both units on.
- Press the calibrator (10) on the baby's unit and the calibrator in the battery
compartment of the parents' unit simultaneously.
- The units will automatically calibrate.
02. Completing calibration
Turn both units off and then on. The units are now calibrated.

Cleaning and maintenance:

Never submerge the units in water and do not clean the units under running water.
Unplug the power adapter if it is plugged in.
Clean the units with a damp towel.
Make sure the units are completely dry before re-connecting them to the power supply.
Clean the adapter with a damp towel.
page 18
NOTE:
The Baby Phone has already been
calibrated during production.
There is normally no need to cali-
brate the units before initial use.
Only calibrate the units when it is
absolutely necessary.
NOTE:
Other radio devices may cause
disturbances in operation. This
is not a malfunction.