Quick Start Guide; Crêpe Maker - nedis FCCM120FBK30 Guia De Inicio Rapido

a

Quick start guide

Crêpe maker
For more information see the extended manual
online: ned.is/fccm120fbk30
Intended use
This product is intended exclusively for making crêpes.
This product is intended for use in household environments for
typical housekeeping functions that may also be used by non-
expert users for typical housekeeping functions, such as: shops,
offices other similar working environments, farm houses, by clients
in hotels, motels and other residential type environments and/or in
bed and breakfast type environments.
This product is not intended for use by persons (including children)
with a reduced physical, sensory or mental capabilities or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the product by a
person responsible for their safety.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Specifications
Product
Article number
Dimensions (l x w x h)
Input voltage
Rated power
Main parts (image A)
1
Spatula
2
Batter spreader
3
Batter spreader handle
4
Cooking plate
Safety instructions
- WARNING
•
Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep this
document for future reference.
•
Only use the product as described in this manual.
•
Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
•
Do not drop the product and avoid bumping.
•
Keep the product out of reach from children.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
•
Disconnect the product from the power source and other
equipment if problems occur.
•
Do not expose the product to water or moisture.
FCCM120FBK30
Crêpe maker
FCCM120FBK30
65 x 330 x 330 mm
220 - 240 VAC ; 50 / 60 Hz
1200 W
5
Thermostat knob
6
Power indicator LED
7
Heat indicator LED
8
Power cable
• The temperature of accessible surfaces may be high when the
product is operating.
• Do not touch the hot parts of the product directly.
• Keep distance from flammable objects.
• Do not let the power cable touch hot surfaces.
• Do not leave the product unattended when switched on.
• Connect to a grounded outlet only.
• Unplug the product when not in use and before cleaning.
• Do not use external timers or remote control systems to switch
the product on or off.
• Disconnect the product from the power source before service
and when replacing parts.
• Children should be supervised to ensure that they do not play
with the product.
• If the surface is cracked, switch off the product to avoid the
possibility of an electric shock.
• Do not place metallic objects such as knives, forks, spoons and
lids in or on the product since they can get hot.
• Do not use a metal tool to remove the food to avoid damaging
the coating.
Before first use
1. Remove all packaging.
2. Clean the product with a damp cloth.
3. Place the product on a stable, flat and heat resistant surface.
4. Plug the power cable A
5. Set the thermostat knob A
4
The cooking plate A
The power indicator LED A
product is switched on.
Leave the product on for about 10 minutes.
4
When the product heats up for the first time, it may emit slight
smoke or odor. This is normal and does not affect the safety of
the product.
6. Unplug the product from the power outlet and allow it to cool
down.
4
The product is now ready for use.
Using the product
1. Place the product on a stable, flat and heat resistant surface.
2. Clean all parts that come in contact with food before use.
3. Assemble the batter spreader by inserting the batter spreader
2
handle A into the cut out of the batter spreader A
4. Plug the power cable A
5. Set the thermostat knob A
4
The cooking plate A
The power indicator LED A
product is switched on.
The heat indicator LED A
product is hot. The product is now ready to be used.
6. Pour the crêpe batter onto A
3
7. Place A in the center of A
rotational motion.
4
Using the correct amount of batter is important. Make sure the
batter covers about 2/3 of the cooking plate. If the batter spills
over the edges, use less batter next time.
3
8
into the power outlet.
5
to max.
starts heating up.
6
lights up red to indicate that the
8
into the power outlet.
5
to max.
starts heating up.
6
lights up red to indicate that the
7
lights up green to indicate that the
4
.
4
and spread the batter with a
3
.