Usb Operation; Line In Operation - Brandt MCB5000BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USB OPERATION

Inserting and removing a USB memory device
Carefully insert a USB memory device into the USB port. To remove the USB memory
device simply pull the device out.
Selecting USB mode
Repeatedly press SOURCE until the USB mode is selected. You can also press USB.
Remote control
Note:
Playback control in USB mode is similar to Disc CD mode.
The USB memory device should not be removed during playback as damage or corruption
of files may occur.

LINE IN OPERATION

1.Connect an audio cable (not supplied) to the LINE IN jack on the front of the unit.
Connect the other end to a suitable output socket on your auxiliary device.
2.Repeatedly press
SOURCE
until the LINE IN mode is selected.
Remote control
3.Turn your auxiliary device on and operate it as usual.
-The sound from the auxiliary device will be heard through the speakers of the product.
4.Adjust the volume level to the desired listening level.
EN-11

Publicidad

Tabla de contenido
loading

Tabla de contenido