The Wake-Up Function; Setting The Alarm Time; Setting The Alarm Source - Sonoro SO-210 Instrucciones De Manejo

Setting the time interval for the Sleep Timer
Fig. 22: Setting the time interval for the Sleep Timer
1. Hold down the[SLEEP] button on the top of the
device or the remote control for a while.
ð The Sleep Timer appears (Fig. 22) and the
Sleep symbol flashes on the display
(Fig. 22/1).
2. Turn the click wheel to select the desired time
interval length (Fig. 22/2). The maximum time
interval is 120 minutes.
i
Alternatively, you can also use the [Next] or
[Previous] buttons to adjust the values.
3. Press the click wheel to confirm the setting.
When the specified time expires, playback gradually
fades out.
9

The wake-up function

You can use the radio to wake up with FM/DAB radio,
a CD, Relax Music or stored ringtones.
All settings are made by pressing the [Alarm 1] or
[Alarm 2] button on the front of the device or the
remote control for a while.
The alarm functions can also be set in Standby mode
of the device.
The alarm Setup menu is structured as follows:
'Set the Wake‐Up Time è Set the Alarm Source
è Set the Alarm Volume
è Set the alarm repeat frequency è End'
i
If you do not enter any information for approx.
10 seconds when setting the alarm, the setting is
terminated without saving it.

9.1 Setting the alarm time

Fig. 23: Setting the Alarm 1
1. Keep the [Alarm 1] or [Alarm 2] button pressed.
ð The submenu for adjusting the alarm time is
displayed (Fig. 23).
2. Set the hour by turning the click wheel.
3. Press the click wheel to confirm the hours.
ð Minutes are displayed.
4. Set the minutes by turning the click wheel.
5. Press the click wheel to confirm the entry.
i
Use the [Next] and [Previous] buttons to
switch between the setting for hours and
minutes.

9.2 Setting the alarm source

After you have set and confirmed the wake-up time,
you can choose the source for the alarm (Fig. 24).
Fig. 24: Setting the alarm source
1. Select the desired medium you want to wake up
with by turning the click wheel and pressing the
[MODE], [Next] or [Previous] buttons.
FM Select an FM station preset from
the station memory that you
wish to start the radio with and
wake up to.
DAB Select a DAB station preset from
the station memory that you
wish to start the radio with and
wake up to.
CD Select a track from the CD you
wish to start the radio with and
wake up to.
Relax Music Select a Relax Music sound from
the memory you wish to start
the radio with and wake up to.
Ringtone Select a ringtone from the
memory you wish to start the
radio with and wake up to.
2. Press the click wheel to confirm the setting.
87