Honeywell Home AquaPUMP PC3F1558IUF00 Instrucciones De Instalación

AquaPUMP™
3-speed Circulation Pumps
APPLICATION
The PC3F in-line, wet rotor circulator with universal flange
is designed for applications in closed-loop hydronic
heating and cooling systems, as well as in solar-powered
systems. The pump is non-submersible and for use in dry,
frost-free, well-ventilated installations.
SPECIFICATIONS
Construction:
Casting: Cast Iron
Bearings and Shaft: Ceramic
Electrical:
115VAC +/-10% 60hz
Internal thermal overload protection
Amperage: See Table 3 on page 2.
Max. Pressure: 145 psi (at room temperature);
50 psi at 200°F (93°C)
Min. Inlet Pressure:
167°F (75°C): 0.73 psi
194°F (90°C): 4.1 psi
Temperature Range:
Ambient: 32°F to 104°F (0° to 40°C)
Storage: -40°F to 100°F (-40° to 38°C)
Water: 14°F to 230°F (-10° to 110°C)
[to 200°F (95°C) with optional check valve installed]
Media:
Clean water or water with up to 20% glycol.
Up to 50% glycol may be used, but flow characteristics will
differ from these specifications as the fluid may be
more viscous.
INSTALLATION INSTRUCTIONS
Sound: Less than 43 dB(A) at 3.3 feet (1 meter)
Standards:
Insulation Class F
Temperature Class TF 95
Approvals: UL/cUL 778, File number 4MX8
Flow Curves: See Figs. 2, 3 and 4 on page 2.
Flange Connection:
Universal flange. See Fig. 1.
Bolt holes: 1/2 in. (12.7 mm)
L3
L4
Fig. 1. Pump dimensions in in. (mm).
Pump Model L1
PC3F1558IUF00 6.5
(165.5)
PC3F2699IUF00 6.5
(165.5)
PC3F4344IUF00 8.5
(216)
a
3-5/32 in.
b
3-7/16 in.
L1
L2
L5
M32832A
L2 L3 L4 L5
5.5 4.7 6.6 a
3.2
(140) (118) (167)
(80.2)
6.1 6.5 7.8 a
3.2
(155) (165) (197)
(80.2)
6.1 6.9 8.9 b
3.4
(155) (174) (227)
(87.3)
62-0383EFS-07