Sony WRR-805A Manual De Instrucciones página 12

Settings
group selection mode or the subsequent wireless channel
selection mode is automatically released.
5
When the desired group is displayed, press the SET
button again.
The group selected is set. The tuner now enters the
wireless channel selection mode, and both of the TV
channel number and 2-digit number flash on the display.
In channel selection mode
6
Press the + or – button to select the desired wireless
channel.
Pressing the + button cyclically changes the wireless
channel in the listed order in the respective table (on
pages L-2 to L-14) and pressing the – button changes it in
the reverse order.
Example:when the group 00 is selected for U68 model
US
12
Display example for U68 model
7
When the desired wireless channel is displayed, press the
SET button.
The display stops flashing and the selected group and
wireless channel are now stored in memory.
To select the channel by frequency indication
1
Turn on the unit and press the MODE button until the
frequency indication appears on the display.
2
Press the SET button.
The frequency indication starts flashing.
In frequency selection
mode
3
Press the + or – button to select the desired channel
frequency.
4
When the desired frequency is displayed, press the SET
button.
The display stops flashing and the selected wireless
channel is now stored in memory.
Display example for U68 model