Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE IT
E
1.
After having removed the device form packaging, check that
there is no visible damage present. Check carefully for any
cracks in the plastic which could leave some electrical
components unprotected.
2.
Position the device on a flat, stable surface that is out of the
reach children and will not be accidentally moved when it's
functioning.
3.
Take mist mouth away, then take water tank off and remove
the lid of it. Enter tap water below 40° centigrade or purified
water. Screw down the tank lid and install water tank on the
mainframe. Put mist mouth in it place.
4.
Connect the engine with a power socket of 230V/50Hz.
5.
Press off-on button, power light will become bright, which
indicates that the engine is working. One or two minutes
later, mist will come out. You can adjust the amount of mist
to the most satisfied degree (with a limitation of the largest
volume).
6.
If you need to revolving mist mouth, press revolving button.
Mist mouth will revolve at 360° angle. Please stop use for 2
hours after a continuous use of revolving mist spraying for
10 hours for sake of longer engine life.
7.
When water is out, light of water deficiency will show. If you
want to go on using it, put in more water.
8.
Once finished push switch "On / Off" until the illuminated
LED switches off.
9.
Disconnect the plug from the electrical power supply
network.
10. Store as indicated in Cleaning and Maintenance if left unused
for extended periods.
Warning: if the device is not used for 2 or more
days, empty the supply tank and clean it with a cloth
or soft sponge.
Always disconnect the power plug before any cleaning operations.
We recommended cleaning the equipment after using, especially
when the surface are wet, as the scale residue can be removed
easier.
1.
Before cleaning, turning power button to "off" and cut off
electricity
2.
Lift water tank away and pour off remaining water in
mainframe
3.
Pour cleaning solution into water tank
4.
Use a soft brush to clean water tank, taking care not to strike
liberating engine.
5.
Use a soft brush to clean water line inductor. Do remove all
scale and make it clean.
6.
Pour off cleaning solution in tank
7.
Use clear water to clean tank. Pay attention not to spill into
air-our mouth. Pour off water
8.
Strictly prohibit change energy slice, which may cause no
mist production
Warning: Leave the tank open and allow it to dry
completely to prevent the formation of any algae or
bacteria.
Tips to avoid scale
a.
Use previously water, filtred or distilled water. Make sure that
the water temperature doesn't not exceed 40°C.
b.
Clean the water tank after every using
CLEANING
c.
Fill the water tank with fresh water every time you use the
humidifier
d.
Clean all parts of the humidifier, empty the water tank and
dry parts with a soft dry cloth.
Do cut off electricity when putting water in.
To maintain and prolong life duration of the product, you must use
clean cold water. Do not use hot water or ice water.
You'd better use filtrating soft water or distilled water. When you
do not want to use the machine and prepare to put it away, do
make water tank and mainframe clean and keep it dry for next use.
You are strictly prohibited scraping or wiping energy exchange
engine whether there is scale or not. You can clean it with solution
and let it dry itself.
When electricity wire is worn out, ask professional staff to
exchange it.
Do not use other chemicals to clean it except cleaning solution.
When using revolving mist spray, remove all barriers.
You cannot force it to a certain angle. If you want to adjust the
angle of mist, please resettle it.
SOME EASY FAULT-DEALING MEASURES
If you humidifier does not work, you can consult the following
measures.
Faults
1. Power light
Not connected
does not show
with electricity
2. Power light
There is no
does not show
electricity from
still
socket
3. The machine
1. There is not
is working but
water in tank
no or little mist
2. The machine is
comes out
not placed level
3. There is
hindrance in tank
or water storage
receptacle
4. There is
deposits on
energy exchange
engine
5. Mineral-
contained water
has been used
6. Energy
exchange engine
has gone wrong
•
Too much deposit will also affect operation of the machine.
Bad maintenance will also result in failure to produce mist
•
If users do not operate and maintain the machine following
instructions of this guide, your machine will not be at the
range of free maintenance.
CA.MI. snc cannot be held liable for accidental or
indirect damages should the device be modified,
repaired without authorization or should any of its
component be damaged due to accident or misuse.
8
CAUTION
Cause
Solutions
Connected wire
with socket
Plug in socket
again
1. Fill is enough
water
2. Place is level
3. Clear with clean
soft brush, then
clean with water
4. Clean surface
of energy
exchange engine
with cleaning
solution
5. Use distilled
water or clear top
water
6. Sent for repair
Publicidad
Tabla de contenido
