Main Applications - Hilti SD 5000 Manual De Instrucciones

2.2 Main applications

Application
Fastening drywall board to metal
framing 0.88 mm
Fastening drywall board to metal
framing 2.25 mm
Fastening metal framing to
metal framing (max. fastenable
thickness 2.5 mm)
Fastening drywall board to wood
Fastening drywall board to metal
( 0.88 mm) and wood framing
Fastening particle board (chip-
board) to wood framing
Fastening: Wood to wood, wood
to particle board (chipboard),
particle board to wood, screws up
to 140 mm in length
Fastening: Wood to metal, steel
grade: ST 37 to 12 mm, steel
grade: ST 52 to 8 mm
2.3 Chuck
/ " bit holder
2.4 Power tool / accessory interface
The depth gauge can be removed by pulling it forward away from the power tool (click connection). The drive
spindle is then exposed. With the drive spindle exposed in this way, the following operations can be carried
out: Removing previously-driven screws (reverse rotation), changing bits, changing the bit holder, attaching
the SMI 55 Plus magazine or the SMD 57 magazine or redriving / tightening previously-driven screws.
2.5 Switches
Speed control switch for smooth speed control and lockbutton for sustained operation.
Forward / reverse switch
2.6 Grips
Vibration-absorbing grip
2.7 Lubrication
Grease lubrication
Printed: 07.07.2013 | Doc-Nr: PUB / 5070555 / 000 / 00
Screw type / in mm
Drywall screw with
needle point, type
S DS 01
Drywall screw with
drill point, type
S DD 01
Special drywall screw
with drill point,
type S DD 02 and
S DD 03
Drywall screw with
needle point, type
S DS 03
Drywall screw with
needle point, type
S DS 14
Drywall screw with
needle point, type
S DS 03
Wood screws
Self-drilling wing
screw with drill point,
type S WW
SD 5000
x
x
x
x
x
x
SD 2500
x
x
x
17
en