nedis RDDB5000 Serie Manual De Uso página 11

Troubleshooting
If you believe that something is wrong with
your DAB+ digital radio, first check the points
listed below.
There Is no sound from my radio
Check that the volume is not set to the
minimum.
Make sure that the radio has been able to
locate DAB/AM/FM stations.
The display shows 'no services available'
in DAB mode
Make sure that DAB coverage easts in your
area.
Try adjusting the position of the aerial or
location of the radio.
Poor reception
As with any radio service, there will be areas
of weak signal that may cause poor
reception. Follow the instructions for manual
tuning on page 16 and adjust the aerial while
monitoring the signal strength until the
optimum signal is obtained. If reception is
still poor, try re* locating the radio to another
part of the room.
I cannot access secondary services
At the time of publishing this manual, not
many secondary services are available in
the Australia. This will increase as more DAB
stations start broadcasting. If a secondary
service station is available, the secondary
indicator '»' will be displayed next to the
station name.
The display goes blank, saying
'SERVICE OFF AIR'
This may occur if a broadcaster changes the
label of a service or removes a label whilst
you are listening to the station. The radio will
try to re-tune to the station. Alternatively,
perform a scan by pressing the AUTO button.
I cannot hear the station I have selected
The station you are listening to is displayed
on line 2. Line 3 shows the selected option,
but you have to press the SELECT button to
tune to the selected station.
I hear distortion on some stations
This is due to a weak signal. Re-positioning
the aerial to gain maximum signal strength.
If the trouble persists, consult your dealer or
contact the Customer Helpline.
11