Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Changing the Rollers Grinding Head
Change the Rollers as needed for best result. the Rollers last for a few sessions
depending on frequency of use and size of area being treated. Replace as needed.
Make sure the unit is turned off before replacing the Rollers Grinding Head.
1.
One hand hold the head, another hand press in the release button, on the side
of the unit, the head will tack out (fig. 9&10).
2.
Place a new Rollers Grinding Head into the unit until you hear a "click' sound. Be
sure to insert the new head into the unit ,it has been firmly installed. Changing
the Rollers Grinding Head
Note: Do not turn your unit On if the Rollers Grinding head is not attached.
9
How to Cleaning and storage
Note: Clean the appliance after each use to ensure better performance
This Callous Remover is water resistant It can be rinsed under water for cleaning:
1.
Remove the protective cover from the head.
2.
Clean the Callous Remover with the cleaning brush. Do not switch the
appliance on while brushing(fig.11).
3.
Rinse the unit under the tap. sometime you can operate the unit, keep the
head running for 5~10 seconds, that quick and high efficiency(fig.12).
4.
Turn the unit off.
5.
Wipe the body of the unit with a clean dry cloth.
6.
Replace the protective cover.
7.
When the appliance is not in use, put it on a dry place that
8.
children can not touch.
9.
Do not place the appliance in an area with excessive heat or moisture.
11
10
12
Publicidad
Tabla de contenido
