Publicidad
Einbauanleitung
Couplings class :
D- Value :
Max. vertical load : 200 kg
Approval number :
FITTING INSTRUCTIONS:
1.
The ball flange with a 56x83 mm hole pattern should be attached to the tow bar or
trailer trestle with four M10 bolts with flat washers and selflocking nuts. Tighten the
bolts to a torque of 65 Nm. The bolt should be long enough for there to be three turns
of thread sticking out of the nut after assembly.
NOTE:
* Don't forget the plain washers.
* All bolts are quality 10.9
* It is recommendable to retighten all fixing bolts and nuts after the towbar
has been in use for some 1000 km/600 miles.
M10
Einbauanleitung
Kugelkopf:*SK-BT-890*
A 50-X
25,0 kN
55R - 012655
Torque settings for nuts and bolts (10.9):
65 Nm
Kugelkopf:*SK-BT-890*
(with self-locking nut)
Stand:27.07.2017
Stand:27.07.2017
Publicidad
