Special Function - Runpotec RT2008 Instrucciones De Uso

E 1
Insert the pluggable attachment into
the tube end.
F
Press the pushbutton until it latches
(CLICK!).
ROTATION FUNCTION
If you hit an obstacle that cannot be
overcome through normal pumping,
enable the rotate function, which ad-
ditionally causes the spiral to rotate, in
order ot overcome even troublesome,
problematic points.
B
Turn the clamping handle clockwise to
clamp. The spiral is axially clamped.

SPECIAL FUNCTION

As of a pipe length of 20 m we recom-
mend the additional use of a cordless
screwdriver to overcome the problem
areas more easily.
Rotate the spiral with the cordless
screwdriver clockwise only.
I.
Clamping handle open
II. Keep spiral tensed.
III. Optimum speed: 800–1200 rpm.
RUNPOTEC GmbH – Irlachstrasse 31 – A-5303 Thalgau
Tel.: +43-6235-20 335 – Fax: DW 35 – office@runpotec.com
2
E
I II
Push in the tube (I) up to the stop and
secure with the red clamping ring (II).
G
Pump to push in the RUNPOGLIDER
spiral MET.
A
Fully extend the elescopic tube.
C
Turn and advance the ratchet
alternately several times.
I
II
ENGLISH
7
III