Electrical Connection; Switching On The Cleaner - Alto POSEIDON 1200 Instrucciones De Manejo

4.1.3 Electrical connection

4.2 Switching on the
cleaner
4.2.1 Switching on the
cleaner when it is
connected to a water
supply
30
☞
0
I
M
NOTE!
See chapter 9.3 for required
quantity of water and water
pressure.
In the case of poor water quality
(sand, etc.), we recommend
that a fine water filter is fitted in
the water inlet.
We recommend the use of a
textile-reinforced water hose
with a nominal diameter of min.
3/4" (19 mm) and a length of
min. 6 m.
The cleaner should be fitted
with a preliminary water tank if it
is used with
• hot water or
• high-pressure hoses longer
than 10 m or
• permanent pipe installations.
CAUTION!
Connect the cleaner only to an
electrical installation that
complies with regulations.
Follow the safety instructions in
chapter 1.
1. Plug the cleaner into the
electrical socket.
1. Turn the main switch to
position 1.
2. Unlock the spray gun and
operate it.
3. Fast the safety catch even
during short pauses.