Loading Fasteners; Staple And Nail Loading - Porta-Nails 465SLT Manual De Instrucciones

WARNING
When loading fasteners into the Tool,
1.) Do not contact the ram cap.
2.) Keep the Tool pointed downward.
TO PREVENT ACCIDENTAL INJURIES:
• Never place a hand or any other part of the body in Tool discharge area of Tool while the air
supply is connected.
• Never point the Tool at anyone else.
• Never engage in horseplay.
• Always handle the Tool with care.
• Do not depress the trip mechanism while loading the Tool.

STAPLE AND NAIL LOADING

(Porta-Nails Model 465SLT Pneumatic Floor Stapler & Nailer)
Insert 15 .5 gauge Staples, "L" or "T" 16 gauge Cleat Nails in the end of the magazine as shown .
Pull pusher assembly back to engage pusher to strip of Nails . The Tool is now ready to operate .

LOADING FASTENERS

15