Sears Kenmore 473.85920 Manual Del Propietário página 22

ROUTmNECARE FOR YOUR CARPET CLEANER
CLEAN THE NOZZLE
Unplug carpet cleaner from emectrica{ outlet.
Remove solution and recovery tanks to prevent
possible leaks.
_Lift up on top of nozzle and slide off cleaner.
Wipe debris off nozzle and front of cleaner with a
damp cloth.
_Tilt cleaner back, raising front of cleaner off
floor. Slide nozzle up from bottom of cleaner.
_J
Press on upper portion of nozzle until it snaps in
place.
CLEAN THE BRUSHES
Unplug carpet cleaner from electrical outlet.
Remove solution and recovery tanks to prevent
possible leaks.
Tilt cleaner back onto the floor, resting it on its side.
_Pull brush assembly firmly to remove.
Rinse brushes under running water. Shake brushes
to remove excess water.
_Align posts on brush assembly (A) with slots in
cleaner (B).
Turn brushes slightly to align square post (C) with
square hole (D) in cleaner.
Press brush assembly firmly and snap in place.
B
D
22