Crossover in 2-way confi guration | One component set per channel
• At least two amplifi er channels are needed for stereo operation (only one channel is shown)
woofer
Set the tweeter output-level switch
to 0 dB, +3 dB, or +6 dB. Higher
switch settings will result in more
volume from the tweeter.
source unit / amplifi er
Crossover in 2-way confi guration | Two component sets per channel
• Requires two complete DS systems (four woofers, four tweeters, four crossovers)
• At least two amplifi er channels are needed for stereo operation (only one channel is shown)
• Crossovers wired in parallel
woofer
source unit / amplifi er
2011 DS Components Multilingual f01.indd 3
2011 DS Components Multilingual f01.indd 3
+
-
-
-
OUT
tweeter
-
OUT
TW
-
OUT
MID
crossover
-
+
-
IN
- OUT
+
+
tweeter
-
crossover
+
IN
+
-
woofer
-
OUT
MID
crossover
+
IN
3
8/10/2010 11:23:26 AM
8/10/2010 11:23:26 AM