Poker Connection To Flexible Shaft; Inspection; Dimensions Of Wear For Diameters And Lengths Of The Pokers; Periodic Mantenance - ENAR BACKPACK Serie Manual De Instrucciones

6.4 POKER CONNECTION TO FLEXIBLE SHAFT

The flexible shafts TDX and TBX are intended to connect the pokers: AX45.
Allowing to interchange of a poker to other quickly and without a special tool. The model AX25 and AX32
due to the diameter need a special transmission. (TDXE).
CONNECTION PROCEDURE:
1-Introduce the hexagonal driver of the poker in the shaft.
2-Screw the poker on the screwed end of the transmission up to fasten with spanner. ( left
threads).

6.5 INSPECTION

1. Before starting the job , check the correct working of all handling and safety devices
2. Inspect regularly the good condition of the transmission. When the hose is broken, repair it or
replace it to avoid damaging the shaft or the poker.
3. When notice wear parts, replace it.
4. If defects are found in the safety devices or other defects which could reduce the safe handling of
the equipment, notify immediately to proper responsible person.
7 DIMENSIONS OF WEAR FOR DIAMETERS AND LENGTHS OF
THE POKERS
DIAMETER
MODEL
(mm)
AX 25 23,5 (25)
AX 32 30,5 (32)
AX 40
38,5 (40)
AX 45
43 (45)
A. The minimum dimensions are bold printed.
B. The dimensions into brackets are the original dimensions.
C. Replace the housing when reach the minimum diameter.
D. Replace the tip when reach the minimum length.

8 PERIODIC MANTENANCE

8.1 PERIODIC MAINTENANCE OF THE PETROL ENGINE

1.- Daily (8 hours).
Clean the engine and the beams, check the bolts & nuts, check and fill the engine
reservoir with oil.
2.- Weekly (50 hours).
Change the motor oil (first 20 hours), clean the sparking plugs and the air filter.
3.- Monthly (200 hours).
Clean the oil filter, clean and adjust the sparks plugs.
BACKPACK / VIB-BAR - FLEXIBLE SHAFT AND POKERS
LENGHT
(mm)
310 (220)
360 (366)
330 (335)
320 (325)
TBX0,5, TDX2m – BACKPACK / VIB-BAR
AX25, AX32, AX45
en
7