nedis Zigbee WIFIZB10CWT Manual De Instrucciones página 6

4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Connecting to the app
1. Tap + in the top right corner in the Nedis SmartLife app.
2. Select the product type you want to add from the list.
3. Plug the product into a power outlet.
The status indicator LED A
4 If not, press and hold the function button A
enter the pairing mode.
4. Tap Next step in the app.
5. Enter the Wi-Fi network data and tap Confirm.
6. Type in a name for the product and tap Done.
The product is now ready for use.
4
For more information on how to connect and use the different sensors with
the product, consult the manual of the sensor.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFIZB10CWT from our
brand Nedis , produced in China, has been tested according to all relevant CE
®
standards and regulations and that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable)
can be found and downloaded via:
nedis.com/wifizb10cwt#support
For additional information regarding the compliance, contact the customer
service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
2
blinks green to indicate pairing mode is active.
6
3
for 5 seconds to manually