Orbegozo PHE 85 Manual De Instrucciones página 18

PHE 85
Table of injector
The hose and regulator assembly must conform to local standard codes
•
Regulator outlet pressure should meet the corresponding appliance category showed in the
•
specifications
The appliance requires approved hose in 0.5 m
•
ASSEMBLY PARTS
Tools needed:
Philips screwdriver w/ medium blade
Spray bottle of soap solution for leakage test
A. Protective guard of flame.
B. Burner
C. Cylindric housing
D. Base
E. Wheels
APPLIANCE CATEGORY:
TYPES OF GAS:
GAS PRESSURE:
TOTAL HEAT
INPUT (Hs): (Qn)
INJECTOR SIZE:
I
3+(28-30/37)
Butane Propane
28-30mbar 37 mbar
11 Kw (800g/h)
1.75 mm for main burner
0.22 mm for pilot burner
18