König Electronic HAV-PRDVD10 Manual De Uso página 13

BASIC MENU OPERATION FOR DVD
Press the SETUP button on the remote control unit to setup the initial settings, Select
SETUP PAGE through directional buttons, the selected item will be highlighted.
MENU OPERATION
You can setup the mode of audio and video output, OSD language, initial setup, parental
control and so on. You can also select the aspect ratio of the playback picture to fi t your
TV screen. Press the SETUP button and the system will put itself into stop mode.
1. Introduction of setup page
SYSTEM SETUP
Press SETUP and select system setup page
TV SYSTEM
Using up/down arrow button to make a selection for DVD system, There are three TV
output systems to choose from: NTSC, PAL and MULTI.
SCREEN SAVER
Using up/down arrow button to select the status of the screen saver.
ON: when enabled, after the machine has been idle [e.g. in stop/pause state or waiting
for user input for about 60 seconds], the video will be blanked while a screen saver will
bounce around the screen to protect the screen.
OFF: no screen saver
VIDEO
There are multiple video out and video in options;
TV TYPE
Using left/right arrow button to select TV aspect ratio.
4:3 PS: 4:3 Pan & scan video output for a normal TV set.
4:3 LB: 4:3 Letter Box video output for a normal TV set, the screen displays the wide
picture with bands displayed in the upper and lower portion of screen.
16:9:16:9 wide screen video output for a wide screen TV set
PASSWORD
The initial setting of this item is locked, you will not be able to set the rating and you can
not change the password. To change these things, you have to enter the initial password:
136900. Press ENTER, you can then change ratings and the password.
RATING
1 KID SAFE
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC 17
8 ADULT
13