Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 82
Power Sources
Using AC Power
Connect the AC power cord to the AC socket and standard household wall outlet. The
batteries will be automatically disconnected. For dual voltage version, make sure that the
AC VOLTAGE SELECTOR is switched to your local voltage.
Battery Operation
The battery compartment is located on the back of the device.
* Remove the battery compartment door by pressing downward on the tabs as shown in
fi gure 1 below.
* Insert 8 D size (UM-1) batteries into the battery compartment as shown in fi gure 2
below. Be sure to observe the polarity markings which are engraved inside the battery
compartment. If the batteries are inserted incorrectly, the device will not work.
* Replace the battery compartment door.
NOTE: The AC power cord must be disconnected from the AC socket on the back of the
unit in order for the unit to operate on battery power.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device.
1. Use only the size and type of batteries specifi ed.
2. Be sure to insert the batteries according to the indicated polarity in the device. Reversed
batteries may damage the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4. If the device is not going to be used for a long period of time, remove the batteries. This
prevents any damage or injury caused by leaking batteries.
5. Do not try to recharge batteries which are not intended to be recharged, they can
overheat and rupture.
ENGLISH
2

Publicidad

Tabla de contenido
loading

Tabla de contenido