System Test - Health O Meter PROPLUS Instrucciones De Uso

OPERATION INSTRUCTIONS
To display time in a 24 hour format, highlight ― Yes‖ and press the ENTER button. The display will return
to the System Settings menu. If the 24 hour format was selected and the correct time was set in the 12
hour format, the display will automatically convert the time to the 24 hour format. If the user needs to set
the time and date, select menu option 01-Set Time and Date to set the correct time for the 24 hour for-
mat.
05-System Settings
→
01-Set Time & Date
02-About
03-Display 24 Hour
▼▲ to change Enter

06 SYSTEM TEST

Before making any changes to this scales settings, please refer to the Menu instructions on page 7 to
temporarily activate the Menu key.
Main Menu
05-System Settings
→
06-System Test
07– User Settings
▼▲ to change
08-Exit
01 Battery Test
01-Battery Test
0
▼▲ to change Enter
▲
→
01-Set Time
02-Set Date
▼
▼▲ to change
▲
▼
Enter
When there are batteries in the scale, the display will show the
estimated amount of battery life remaining until the batteries will
have to be replaced.
10
NOTE: In order to complete the battery test, the display must be
powered by batteries only. Unplug the display from the AC power
01-Set Time
▲
▼
Enter
01-Set Time
16:32:01
Enter
06-System Diagnostic
→
01-Battery Test
02-USB Connection
03-UI Test
▼▲ to change
17
▲
▼
Enter