Trodat DRYTEQ Manual De Uso página 18

Defect
Device does
not charge
Ink does
not harden
No impression
possible
Possible
cause
No electrical
power
Device was inac-
tive for too long
(energy-saving
mode)
Charging
temperature
not permitted
- 0°C > 45°C
UV LEDs are
dirty
Distance bet-
ween UV LEDs
and ink is too
great
Exposure time
was not long
enough. The
exposure unit
was lifted off
too fast
No ink cartridge
inserted into the
stamp
Ink cartridge
dried up
Solution
Check the
charging
device
Device will still
be charged Turn
the device off
Charge the
device in the
permitted tem-
perature range
Carefully clean
the UV LEDs
with a
soft cloth
Lessen the
distance Set
the UV exposure
unit to cure
above the stamp
impression
During
exposure, wait
until the blue
status indicator
lights up
Insert the ink
cartridge into
the stamp
Replace the ink
cartridge
EN
18