HJM CP136 Instrucciones De Uso página 30

Centro Planchado CP136_Maquetación 1 01/03/16 09:53 Página 30
- Installation must be carried out according to the manufacture's ins-
tructions.
- The supply cable must not be replaced by the user, as this requires
the use of special tools, if the supply cable is damaged, contact an
authorized Service center.
- Do not fill the appliance under a running tap.
- Do not allow the supply cable to come into contact with the ironing
plate.
- If the safety cutout intervenes, the iron will no longer function. To
restore normal operation. Contact a qualified electrician.
- Never direct the steam jet in the direction of persons, as this may
be extremely dangerous.
- Do not use the iron on very wet fabrics.
- Do not overfill the water tank and do not add stain-removers of simi-
lar products to water.
- Remove the plug from the mains socket when the appliance is not
in use. Do not leave the appliance switched on unnecessarily.
- The boiler must never be moved during operation.
- Never unscrew the boiler cap when the appliance is connected to
the power supply network.
- Use a funnel to fill the boiler without causing the water to overflow.
- The boiler must be placed on a flat surface that is particularly resis-
tant to high temperatures.
- Keep this booklet in safe place for future reference. This appliance
complies with EEC Directive 87/308(D.M. 13/04/89) regarding the
suppression of radio disturbance.
Steam Ironing
Before ironing, check that the garment to
INSTRUCTIONS FOR USE
How to fill the boiler tank before use
DO NOT UNSCREW THE BOILER CAP UNLESS YOU ARE SURE
THAT THE APPLIANCE HAS BEEN UNPLUGGED FROM THE
OUTLET (FIG. 2) AND THAT THE PRESSURE INSIDE HAS BEEN
RELEASED.
- 30 -
E
N
G
L
I
S
H