Orbegozo PHF 31 Manual De Instrucciones página 14

PHF 31/PHF 26
• Important! Do not insert any foreign objects into the
appliance openings! Risk of injury (electric shock)
and damage to the appliance!
• Keep the mains cord at a safe distance from the air
inlet and outlet grilles.
• The heating appliance must be installed at least
1.8m above the ground. Please never install the
appliance on the ceiling
ASSEMBLY OF THE APPLIANCE
To assemble, follow these instructions:
• Stand mode (only model PHF 31)
1. Attach the counterweight inside the base using the 4 screws provided.
2. Attach the lower column to the base using the 4 screws provided and then insert the
ring nut.
3. Connect the intermediate column to the lower one and then the upper one, attaching
them with the screws provided.
4. Connect the heating part to the upper column and attach it by tightening the knob
on the screw.
5. Hook the electric cord to the ring.
Minimal height: 1.8 m
Maximal Height: 2.1 m
Note: Never install the appliance on the ceiling
• Wall mode
1. Remove the attachment from the back of the stove. Put it on the wall and mark the
position of the screws
2. Replace the accessory on the stove with the help of the screws
3. Install the entire stove on the wall
Note: Never install the appliance on the ceiling
14