Skil LH5537A-00 Manual Del Propietário página 11

Two-Stage Brightness Adjustment
and Strobe Setting Controlled by
ON/ OFF Button (Fig .3)
Your tool is equipped with a two-stage
brightness adjustment, providing different light
intensities for your operation.
a. Depress the ON/OFF button to turn on the
light: the light is in the high light mode.
b. Depress the ON/OFF button again to change
to the low light mode.
c. Depress a third time to turn the light off.
Strobe setting
Press and hold the ON/OFF Button for about
2 seconds to activate the strobe setting. Press
the ON/OFF Button again to skip the strobe setting and back to the last operating status.
Adjusting the Light Head (Fig . 4a,4b)
The light head can be pivoted vertically 180° or swiveled horizontally 270° for maximum
flexibility. Manually move the head to any position within its range. Do not force the head
beyond that range.
Fig. 4a
MAX:180 o
Fig. 3
ON/OFF Button
Fig. 4b
MAX:270
o
11