Assembly Procedure - FLORABEST FGW 84 A1 Instrucciones De Uso

Assembly procedure

GB
MT
15
42
Step 1
♦ Connect the storage holder
washers Ø 5.4, M5 x 10 screws and nuts M5.
Please take note that only the lower hole of the storage holder
used for the screws.
♦ Secure the reinforcing braces
the washers Ø 5.4, M5 x 10 screws and nuts M5. Secure the reinforcing
braces with the storage holders
16
M5 x 10 screws and nuts M5.
♦ Assemble the wheel braces
to the left of the fi re bowl
screws and nuts M5. For this, use the upper hole in the wheel braces
14
Step 2
♦ Assemble the handle holder
Fix the handle
7
them by means of the wood screws Ø 4 x 10.
♦ Assemble the stand braces
the fi re bowl by means of M5 x 12 screws, washers Ø 5.4, M5x10
6
screws and nuts M5. For this, use the upper hole in the stand braces
with the wheel brace
15
with the wheel braces
16
by means of the washers Ø 5.4,
15
, with the assembled storage holder
14
6 by means of the washers Ø 5.4, 2 M5x12
15
and stand braces
8
between the short handle holders
9 , with the assembled handle, to the right of
8
7
9
Assembly
by means of the
14
15
by means of
14
M5x10
6
M5x12
14
16
M5x12
as described in step 1.
9
and then secure
8
M5x10
6
M5x10
is to be
,
15
.
14
M5x10
9 .
FGW 84 A1