Cooktop Installation - LG LCE3010SB Manual Del Propietário

I N S TA L L AT I O N I N S T RU C T I O N S
eLectricaL connectionS
IF COOKTOP IS USED IN A NEW BRANCH CIRCUIT INSTALLATION (1996
NEC), MOBILE HOME, RECREATIONAL VEHICLE, OR WHERE LOCAL CODES
DO NOT PERMIT GROUNDING TO THE NEUTRAL (WHITE) WIRE
Observe all governing codes and local
ordinances.
Disconnect the power supply.
1
At the circuit breaker box, fuse box or
2
junction box, connect appliance and power
supply cable wires as shown.
WARNING
If connecting to a 4-wire power supply
cable electrical system, the appliance
frame connected ground wire MUST NOT
be connected to the neutral wire of the
4-wire electrical system.

cooKtoP inStaLLation

Visually inspect the cooktop for damage.
1
Make sure all cooktop screws arve tight
(see below for locations).
26
Screws
(cont.)
4-WIRE GROUNDED JUNCTION BOX
Cable from power supply
Ground
Wire
Red
wires
Green wire (ground)
Cable from cooktop
Carefully lower the cooktop into the counter-
2
top cutout, making sure not to trap any wires.
NOTE: Do not use caulking compound. The
cooktop must be removable, should service
be required.
White wire
(no connection)
Black
wires
Junction box
UL-listed conduit
connector