Dörr PB-10000 Manual De Instrucciones página 8

03 | NOMENCLATURE
01 Solar cells
02 Stand with adjustable cord
03 Fastening eyelets
04 LED capacity indicator (4 blue LEDs)
05 On/Off button
06 Rubber cover
07 USB ports (Output)
08 Micro USB port (Input)
09 LED charging indicator (1 red LED)
10 Micro USB charging cable
04 | CHARGING THE SOLAR PANEL
Before first use, please fully charge the built-in battery.
04.1 Charging via USB
Open the rubber cover (06). Insert the Micro USB plug of the supplied USB charging cable (10) into the 5V 2A Micro USB port (08)
and connect the solar panel with a USB charging source (e.g. PC, Laptop).
After charging, please remove the solar panel from the USB charging source. With a is totally empty battery, the charging time by
PC is about 4 hours.
04.2 Charging via solar cells
Place the Solar Panel into sunlight, with the solar cells (01) facing to the sun.
For best alignment of the solar cells, use the stand (02) and change the stand angle with the adjustable cord.
To charge the solar cells on the go, the solar panel can be attached using the fastening eyelets (03) - for example to fix the solar
panel to a backpack.
With full sunlight conditions, the charging time of an empty solar panel is approx. 6 hours.
While charging, the LED capacity indicator (04) flashes blue and the LED charging indicator (09) lights red. The solar panel is fully
charged when all 4 LEDs of the LED capacity indicator (04) light blue constantly.
04.3 LED capacity indicator
Press the On/Off button (05) to show the remaining power of the solar panel. The blue LED charging indicator (04) displays
remaining power as follows:
1 LED
2 LEDs
3 LEDs
4 LEDs
8
0 – 25% capacity
25 – 50% capacity
50 – 75% capacity
75 – 100% capacity
doerr-outdoor.de