HQ EL-PILRLA90 Manual De Uso página 2

Solar sensor lamp
Installation Guide
HIGH SENSITIVITY from motion activity coming across the detector.
Fluctuation angle adjustment
LOW SENSITIVITY from motion activity coming towards the detector.
Rotation angle adjustment
• The light fixture should be installed on a flat and stable surface.
• Avoid placing objects in front of the motion detector that may affect detecting performance.
• Avoid installing the light near an air conditioner, a central heater, or any high voltage system.
• Avoid placing the motion detector head facing toward street traffic or other movements. This will
result in a false trigger that will prompt the light to illuminate excessively and drain the battery life.
• Motion detection is most sensitive to movement across the device and less sensitive to motion
moving towards or away from it (see pictures below).
• The solar charger board should be set in a sunny area where the maximum amount of sunlight can
be collected. Typically, the solar board should face in a direction (south) where sunlight can charge
the board for at least 3 hours per day (5 hours per day if behind glass). It is recommended that you
charge the light for 24 hours before its first use.
• Use a soft wet cloth to periodically (at least once a year) clean the charger board to avoid the
reduction of power output due to accumulated dust.
Sensor Information
Quick Setup Procedure
Warning!
ENGLISH
15m
Correct angle
1. Please keep the product away from children.
2. This product can installed for outdoor use, but we recommend
against that for rain/storm & high lights.
2
180°
Detection angle