Projector Firmware Upgrade; Upgrade Interface - BARCO ICON H600 Manual Del Usuario

Imagen 9-27
9.3.3

Projector Firmware Upgrade

What can be done ?
The client software allows to do an upgrade of the projector's firmware.
The upgrade is done with a binary file (extension = ".bin") which is sent to the projector using the LAN connection.
Single projector as well as multiple projector (group) upgrade is possible
How to upgrade the firmware ?
1. Click on Configuration in the toolbar
2. Click on Upgrade to open the firmware upgrade screen
Véase imagen 9-28.
3. Use the Browse key to select the desired bin file.
4. Press the Upgrade button on the browser to select the file to start the operation (imagen 9-29)
5. Press the Upgrade button on the upgrade screen to start the operation
The information screen will show the progress of the operation.
Imagen 9-28

upgrade interface

R5976821S BARCO ICON 28/01/2005
9. Operaciones de red Centric
133