Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING THE APPLIANCE
Speed regulator
Switch
Speed 0-8
1.
Power plug connected to the power supply, and the timer shows"00:00", at this time the machine in
standby mode.
2.
Switch the switch knob (8) to the required speed(Min-Max), the machine will start to work, the timing
display will count and show the working time automatically.
3.
To stop the appliance, turn the switch knob(8) to OFF, and the time will be clear to "00:00".
4.
To interrupt the working process, just press "-"&"+" button at the same time to pause it. And when you
want to re-start, just press the"-"&"+"button at the same time again to continue the process to the end.
5.
If you want to set the timing display to control your recipes working time, just press "-"&"+" touch
control button to preset time from 0 to max 30 mins. The timing display will show the time count
backwards. If you do not want to preset the time,then the timing display will count and show the
working time automatically.
6.
When the machine is working, if you press the release button to raise the drive arm (4) upwards, then
the machine will be interrupted, the time will show the stop time when interrupted. If you press the
release button again to lower down the drive arm, then you need to press the"-"&"+"button at the
same time again to continue the process, the timing display will recover to count the working time.
7.
During preparation, you can add ingredients through the funnel.
A
Timing display
Led
B
9
GB
Time
Knob
Publicidad
Tabla de contenido
