Sony Trinitron Multiscan17se II GDM-17SE2T5 Manual De Instrucciones página 11

Checking the Signal Frequency
It is possible to check the current vertical and horizontal
frequencies of the input signal received.
Press the OPTION button.
The OPTION OSD (On Screen Display) appears.
OPTION
COLOR TEMPERATURE
INPUT:
HD1 5 BNC
LOCK: UNLOCK LOCK
80.0KHz/ 75Hz
SELECT SET
Horizontal Vertical
frequency
frequency
Resetting the Adjustment
Data to Factory-preset Levels
To reset an adjustment item
If you want to reset the color temperature
Select one of the three color temperature modes, (See
"Setting the Color Temperature" on page 9), and then press
the RESET button before the OSD (On Screen Display)
disappears.
If you want to reset the other adjustment items
Press the button of the adjustment item you want to reset,
and then press the RESET button before the OSD (On
Screen Display) disappears.
To reset the brightness, contrast, size,
center and pincushion adjustment data at
once (for the received signal)
Press the RESET button with something like a coin for one
second when no OSD is shown.
RESET
To reset all adjustment data to factory-
preset levels
Press and hold the RESET button for more than 2 seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.
RESET
EN
11