Uninstalling; Inserting Lamps; Folding In Lamps; Dismantling The Carrier System - Minnid e.base Instrucciones De Uso

GB
< 380 mm
Ø Make sure that the distance between the
outside edge of the vehicle and the lamp
holder is now less than 380 mm.
Ø Close the quick release devices.
24
8

Uninstalling

8.1

Inserting lamps

Ø Open the quick release devices.
Ø Push the lamps inwards.
Ø Close the quick release devices.
8.2

Folding in lamps

Ø Fold in both lamps until they click into
place.
Ø Check that the lamps are properly engaged.
8.3

Dismantling the carrier system

Ø Remove the cover cap from the lock.
Ø Put the key in the lock.
Ø Unlock the lock.
Ø Pull the handle out of the large recess on
the left.
Ø Swivel the handle along the cam disc into
the small recess on the right.
Ø Check the marking on the handle.
Ø The marking must indicate "RED".
Ø Pull the e.base carrier system down from
the e.hit carrier system support arms.
Ø Pull the handle out of the small recess on
the right.
Ø Swivel the handle along the cam disc into
the large recess on the left.
Ø Check the marking on the handle.
Ø The marking must indicate "GREEN".
Ø Lock the lock.
Ø Remove the key.
Ø Press the cover cap onto the lock to protect
it from moisture and dirt.
1.240.160BA_20191212