Maintenance; All Models - Craftsman ZT 700 Manual Del Operador

MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RNDER MAINTENANCE, All Models
Before Spring 8 25 100 200 Yearly
Each Use & Fall Hours Hours Hours Hours
Clean Debris from Rider and Engine Compartment * •
Clean Debris from Engine Cooling Areas & Air Filter * •
Check Tire Pressure •
Lubricate Rider & Mower * •
Clean Deck & Check/Replace Mower Blades •
Clean Battery & Cables •
Check Hider Safety System ** • • •
Check / Adjust PTO Clutch •
ENGINE MAINTENANCE,
8 Hours 25 Hours or 100 Hours 200 Hours 200 500
20HPKohler
orDaily 2Months orAnnually or 2Years Hours Hours
Check Engine Oil Level * •
Check Air Cleaner & Intake * •
Check/Clean Cooling Fins & Intake * ®
Service Air Filter * ®
Change Oil & Filter * •
Remove Shroud, Clean Cooling Fins * •
Replace Fuel Filter 1 •
Check & Re-Gap / Replace Spark Plug • •
Service Starter Drive, Check & Adjust Valve ®
Clearance 1-
ENGINE MAINTENANCE,
8 Hours 25 Hours 50 Hours 100 Hours 200 Hours or Yearly
22HP Briggs & Stratton
or Daily or Every or Every or Every Every Season
Season Season SeasoR
Check Engine Oil Level * ®
Service Air Pre-Cleaner * ®
Change Oil * •
Service Air Filter * •
Change Oil & Filter * •
Clean Cooling Fins * •
Replace Air Filter * ®
Replace Spark Plugs •
Replace Fuel Filter i- ®
Check Valve Clearance 1- •
* More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
i- These services should be performed by Sears or other qualified service dealer.
17