To obtain disinfecting wipes and other information, please contact
Medline at 1-800-MEDLINE (1-800-633-5463) or visit www.medline.
com.
You can also purchase at www.amazon.com.
Disinfecting Procedures:
1. Take out one disinfecting wipe from the package and squeeze out
any excess liquid in order to prevent damage to the meter.
2. Wipe all meter ' s exterior surface display and buttons. Hold the
meter with the test strip slot pointing down and wipe the area around
the test slot but be careful not to allow excess liquid to get inside.
Keep meter wet with disinfection solution for a minimum of 2 minutes
for Micro-Kill+™ wipes. Follow the instructions on the package label of
disinfecting wipe. Use two or more wipes if necessary.
3. Allow the meter surface to dry completely.
38