YEVO AIR Manual Del Usuario página 4

1
2
3
4
ENGLISH
CONNECT AND USE
1. Activate Bluetooth on your phone/device.
2. Remove the YEVOs from the charge case, and select
YEVO Air on your phone/device to pair.
3. Insert the earbuds in an upright position, and adjust by
rotating backwards into a locked position.
4. The LED hole on the earbuds should point forward
towards your nose.
Your YEVO comes pre-fitted with medium sized ear tips.
Try different sizes to achieve a comfortable and secure fit.
CHARGING
To charge the earbuds, place them in the charging case.
Charge the charging case by connecting the included
Micro-USB cable to a USB power source.
CALLS
When using the YEVO Air for telephone calls, only the
Right (R) earbud is active.
LED GUIDE
The earbuda & case lights while charging. Earbud (R) LED
flashes once removed from the case and continues to
flash until it's connected to a Bluetooth device.
TOUCH CONTROLS
Left or Right
Power On + Pairing
Power Off
Power On + Reset Bluetooth
Right
Play / Pause
Next Track
Previous Track
Call Answer / Call End / Call Switch
Reject Call
Call Transfer
Siri / Google Voice
Left
Volume Up
Volume Down
2 SEC
TAP
4 SEC 10 SEC