Product Description - OBO Bettermann UDHOME 2 AF Instrucciones De Montaje

Information on the product
26 | EN
3.2

Product description

10
9
8
Abb. 25: Floor socket product description
The floor socket consists of:
– Tube body cover
1
– 2 Tube body cable outlet
– Cover
3
– 4 Turn buckle
– Mounting support (equipment according to scope of delivery)
5
6
– Height-adjustment screws
7
– Empty pipe entry
– 8 Housing
9
– Protective equipotential bonding
– 10 Mounting protection lid
– Accessory: Strain relief, plug, seal care
Square floor socket for wet-care floor coverings on screed and for
indoor system floors. Installation housing with round cable outlet
in the cover. With seven pre-marked entry openings for installation
pipes (M20/M25). The frame can be adjusted to the top edge of the
floor covering using four height adjustment supports. The minimum
installation depth is 110 mm, the height adjustment range +20 mm.
Depending on the scope of delivery, the floor socket is equipped
with a double socket. Up to two data sockets can be installed using
an optionally available mounting support.
1
2
3
4
5
6
7
OBO Bettermann