Applying The Floor Covering And Adjusting The Height - OBO Bettermann UDHOME 2 AF Instrucciones De Montaje

Applying the floor covering and adjusting the height
ATTENTION
ATTENTION
32 | EN
6 Applying the floor covering and adjusting the
height
Risk of damage through joint mortar!
Contact between the floor socket with joint mortar leads to product
damage!
When applying joint mortar to the expansion joint along the floor
socket, the frame and lid must be protected against the joint mater-
ial.
Risk of damage from joint material/adhesive!
Ingress of the joint material/adhesive into the floor box (cassettes
and floor sockets) can lead to product damage!
Thoroughly clean the interior after floor covering work.
Abb. 35: Remove the mounting cover
1. Remove the mounting lid with a carpet knife and open the
cover.
OBO Bettermann