English
Owner´s manual
6. STARTING THE ENGINE
1) Screw the priming plug off and prime
the pump with water until the water is
overflowing (water pump set shall be placed
on a level ground).
2) Move the fuel valve lever to the "ON"
position.
3) To start a cold engine, move the choke lever
to the "CLOSED" position.
FUEL VALVE LEVER
38
Fuel cock
OPEN
ON
Choke
Lever
CLOSED
4) Move the throttle lever away from the
"SLOW" position about 1/3 of the way toward
the "FAST" position.
Fast
Throttle lever
ON
Throttle lever
Slow