Advanced Cd Or Mp3/Wma Disc Playback; Direct Track Search; Repeat Play; Random Play - Pioneer X-HM50-k Manual De Instrucciones

Advanced CD or MP3/WMA disc playback

n Direct track search
By using the Direct Search buttons, the desired tracks on the
current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected disc.
l The Direct Search buttons allow you to select up to
number 9.
l When selecting number 10 or higher, use the ">10" button.
A. For example, to choose 13
1
Press the ">10" button once.
2
Press the "1" button.
3
Press the "3" button.
B. For example, to choose 130
1
Press the ">10" button twice.
2
Press the "1" button.
3
Press the "3" button.
4
Press the "0" button.
Notes:
l A track number higher than the number of tracks on the
disc cannot be selected.
l During random play, direct search is not possible.
To stop playback:
Press the (CD/USB ) button.
n Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until "Repeat One"
appears. Press the / (CD/USB
To repeat all tracks:
Press the PLAY MODE button repeatedly until "Repeat All"
appears. Press the / (CD/USB
To repeat desired tracks:
Perform steps 1 - 5 in "Programmed play" section on this page
and then press the PLAY MODE button repeatedly until
"Repeat All" appears.
To cancel repeat play:
Press the PLAY MODE button repeatedly until "Normal"
appears and " " disappears.
Selected track number
/ ) button.
/ ) button.
En-13
n Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Whilst in the stop mode, press and hold down PLAY MODE
button on the remote control until "Random" appears. Press the
/ (CD/USB / ) button.
To cancel random play:
Press the (CD/USB ) button.
Notes:
l If you press the button during random play, you can
move to the track selected next by the random operation.
On the other hand, the button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
l In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat play, be sure to press the
) button. Otherwise, the disc will play continuously.
n Programmed play (CD)
You can choose up to 32 selections for playback in the order
you like.
1
Whilst in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
2
Press the or buttons on the remote control to
select the desired track.
Selected track number
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a
mistake, the programmed tracks can be cleared by
pressing the CLEAR button.
5
Press the / (CD/USB
(CD/USB
/ ) button to start playback.